KB Electronics 8811006 Solid State Variable Speed AC Electric Motor Control, 2.5 Max amp, 115V, # K177-1002

#ad
KB Electronics 8811006 #ad - Designed for standard 2" x 4" Electrical Wall Box. Not to be used with Capacitor Start or Capacitor Run Motors. Applications: fans, humidifiers, attic Fans, Blowers, Fireplace Blowers, Ventilators. Control provides infinite variable speed for shaded pole and PSC motors. Motor must be run with sufficient torque to prevent stalling - A motor not turning will burn up Motor must have fan blade installed on shaft direct drive to cool motor.

Not to be used with gear motors. 2. 5 max amps 115 volts; UL & CSA Approved. Controls that have been installed are not returnable. Max amps means that the rated motor name plate amperage can not exceed this rating or you will damage the control and motor.

#ad



Dayton 1TDN7 Round Permanent Split Capacitor OEM Specialty Blower

#ad
Dayton 1TDN7 #ad - Not for use with speed controllers. Includes discharge mounting flange and inlet cover. Open motors with cast-aluminum end shields dissipate heat to help reduce downtime and extend service life. Ul recognized us and canada E47479, ce. Ball bearings. 115 vac. Direct oem replacement blower mounts in any position and maintains cfm at higher static pressures.

. Oem specialty blower.

#ad



Dayton 1TDP3 Round OEM Blower with Flange

#ad
Dayton 1TDP3 #ad - 12 to 75 cfm psc and shaded Pole Blowers, Round Outlet. Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life. Direct replacement for many OEM blowers with same physical footprint. Includes discharge mounting flange and inlet cover.

115 vac. Psc blower, direct drive, forward curve, wheel dia 3 15/16 in, cfm @ 0.000-in sp 75, single phase, voltage 115, 60 Hz, full load Amps 0.45, overall width 6 1/4 in, overall depth 6 7/16 in, overall height 5 3/4 in, max Inlet Temp 104 degree F, RPM 3016, includes discharge mounting flange. All-position mounting; Replaces 4C443.

Dayton 1TDP3 Round OEM Blower with Flange #ad - Range: -20 degree to 104 Degree F. Oem specialty blower. Ul recognized us and canada E47479, ce. Dynamically balanced, the dayton 1tdP3 Blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Min. Max operating temp. Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life.

#ad



Thermal Switch Can be used with Fireplace Blowers for automatic blower operation # 19-SF2-115 by ALLTEMP

#ad
ALLTEMP #ad - Oem specialty blower. Ul recognized us and canada E47479, ce. 115 vac. Thermal switch can be used with Fireplace Blowers for automatic blower operation # 19-SF2-115. Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life. Direct replacement for many OEM blowers with same physical footprint.

12 to 75 cfm psc and shaded Pole Blowers, Round Outlet. Includes discharge mounting flange and inlet cover. Range: -20 degree to 104 Degree F. All-position mounting; Replaces 4C443. Min. Max operating temp.

#ad



Round 3.3 Inch Blower with Flange | Replaces Dayton 1TDP3, 4C443 & Fasco 50748-D500

#ad
P-Tech #ad - Range: -20 degree to 104 Degree F. Min. Max operating temp. All-position Mounting. Direct replacement for dayton 1tdP3, 4C443 and Fasco 50748-D500 Oem specialty blower. Psc blower, wheel dia 3 15/16 in, forward curve, direct drive, cfm @ 0.000-in sp 75, 60 hz, voltage 115, single phase, full load Amps 0.45, overall width 6 1/4 in, rpm 3016, max inlet temp 104 degree F, overall height 5 3/4 in, overall depth 6 7/16 in, includes discharge mounting flange.

Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life. Direct replacement for many OEM blowers with same physical footprint. 115 vac. Min. Max operating temp. Ul recognized us and canada E47479, ce. Includes discharge mounting flange and inlet cover.

Round 3.3 Inch Blower with Flange | Replaces Dayton 1TDP3, 4C443 & Fasco 50748-D500 #ad - Range: -20 degree to 104 Degree F. Dynamically balanced, this blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. All-position mounting; Replaces 4C443.

#ad



Round Permanent Split Capacitor 3.3 Inch Blower | Replaces Dayton 1TDN7, 1C180, 4C440 & Replaces Fasco 50747-D401, 71213466

#ad
P-Tech #ad - Direct replacement for dayton 1tdP3, 4C443 and Fasco 50748-D500 . Oem specialty blower. 115 vac. Min. Max operating temp. Ul recognized us and canada E47479, ce. All-position Mounting. Min. Max operating temp. All-position mounting; Replaces 4C443. Range: -20 degree to 104 Degree F. 115v, 50/60hz, 50/60hz, 115v, 3000 rpm, 1/125hp, 0.

50/045 amps. Ul recognized and CSA certified for quality assurance. Replaces fasco 50747-d401, 71213466. 12 to 75 cfm psc and shaded Pole Blowers, Round Outlet. Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life. Direct replacement for many OEM blowers with same physical footprint.

Round Permanent Split Capacitor 3.3 Inch Blower | Replaces Dayton 1TDN7, 1C180, 4C440 & Replaces Fasco 50747-D401, 71213466 #ad - Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life. Replaces dayton 1tdn7, 1C180, 4C440 Range: -20 degree to 104 Degree F. 12 to 75 cfm psc and shaded Pole Blowers, Round Outlet. Includes discharge mounting flange and inlet cover.

#ad



Iliving 12 Inch Variable Speed Shutter Exhaust Fan, Wall-Mounted, 12"

#ad
iLIVING USA ILG8SF12V #ad - Range: -20 degree to 104 Degree F. 115 vac. All-position Mounting. The fan comes fully assembled out of the box; only installation required is the electrical hardwire. 12 inch variable speed shutter exhaust fan with automatic Shutters. Ul listed with speed controllable, permanently lubricated motor. 12 to 75 cfm psc and shaded Pole Blowers, Round Outlet.

Corrosion-resistant with OSHA compliant wire guards. 115v, 50/60hz, 115v, 50/60hz, 1/125hp, 3000 rpm, 0.50/045 amps. Ul recognized and CSA certified for quality assurance. For variable speed models, the iLIVING ILG8SFSC Speed controller is sold separately. Oem specialty blower. Direct replacement for dayton 1tdP3, 4C443 and Fasco 50748-D500

Iliving 12 Inch Variable Speed Shutter Exhaust Fan, Wall-Mounted, 12" #ad - Includes discharge mounting flange and inlet cover. The iliving shutter exhaust fan is perfect for removing excess heat, warehouses, including restaurants, and unpleasant odors from virtually any commercial location, moisture, factories, barns, and greenhouses. All-position mounting; Replaces 4C443. This fan features aluminum blades, OSHA compliant wire guards, and automatic shutters that open and close in tandem with the operation of the fan.

Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life.

#ad



Universal Fireplace Blower Fan 100CFM 4" Blade 3000RPM #T1-RF100-2

#ad
CECOMINOD071411 #ad - Ul listed with speed controllable, permanently lubricated motor. Min. Max operating temp. Replaces dayton 1tdn7, 1C180, 4C440 Range: -20 degree to 104 Degree F. 115v, 50/60hz, 115v, 3000 rpm, 1/125hp, 50/60hz, 0.50/045 amps. Ul recognized and CSA certified for quality assurance. T1-rf100-2 fireplace blower,. 5 amp, shaded pole/open 2 speed, max 3000 RPM Rotation CCW 100 CFM 2.

75 in. Direct replacement for dayton 1tdP3, 4C443 and Fasco 50748-D500 . Speed controller sold separately. Range: -20 degree to 104 Degree F. Skeleton motor Blower includes mounting bracket, and fan blade mounting holes 4. 25 inches center to center all four holes prop dimension 4. 5 inches cross ref: montego, c01574, ef100 rf100, 2811-581-002, selkirk, electrahome 2811-581-001, EF100-2 RF100-2 115 vac.

Universal Fireplace Blower Fan 100CFM 4" Blade 3000RPM #T1-RF100-2 #ad - Rotation ccw, 100 CFM. Mounting holes 4. 25 inches center to center all four holes. Oem specialty blower.

#ad



12" Aero-Flo Model Inline Duct Fan 975 CFM

#ad
Aero-Flo Industries Inc. AF-12 #ad - 975 free air Rated CFM. 65 watts. 80 amp Draw. Min. Max operating temp. Replaces dayton 1tdn7, 1C180, 4C440 Range: -20 degree to 104 Degree F. 115v, 50/60hz, 1/125hp, 50/60hz, 3000 rpm, 115v, 0.50/045 amps. Ul recognized and CSA certified for quality assurance. 12 to 75 cfm psc and shaded Pole Blowers, Round Outlet. 266 degree max operating Temp Great for Wood Stoves.

Rotation ccw, 100 CFM. Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life. Ul listed with speed controllable, permanently lubricated motor. Range: -20 degree to 104 Degree F. All-position mounting; Replaces 4C443. Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life.

12" Aero-Flo Model Inline Duct Fan 975 CFM #ad - Direct replacement for many OEM blowers with same physical footprint. Min. Max operating temp. Replaces fasco 50747-d401, 71213466.

#ad



Dayton 2C647 Rectangular Permanent Split Capacitor OEM Specialty Blower

#ad
Dayton 2C647 #ad - Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life. The motor has cast-aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life. Min. Max operating temp. Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life.

Direct replacement for many OEM blowers with same physical footprint. Corrosion-resistant with OSHA compliant wire guards. Ul/cul component recognized. Permanent lubrication-Impedance Protected-Auto thermal Overload. Noise and vibration are held to a minimum to maintain cfm at higher static pressures. Speed controller sold separately.

Dayton 2C647 Rectangular Permanent Split Capacitor OEM Specialty Blower #ad - 65 watts. 80 amp Draw. 12 to 75 cfm psc and shaded Pole Blowers, Round Outlet. Rotation ccw, 100 CFM. 12 inch variable speed shutter exhaust fan with automatic Shutters.

#ad



Iliving 16 Inch Variable Speed Shutter Exhaust Fan, Wall-Mounted, 16"

#ad
iLIVING USA ILG8SF16V #ad - Includes discharge mounting flange and inlet cover. The iliving 30 inch and 36 inch shutter fans are only available in single Speed. For variable speed models, the iLIVING ILG8SFSC Speed controller is sold separately. 115 vac. The completely enclosed motor is thermally protected and permanently lubricated. Speed controller sold separately.

All-position Mounting. 115v, 50/60hz, 3000 rpm, 115v, 50/60hz, 1/125hp, 0.50/045 amps. Ul recognized and CSA certified for quality assurance. 65 watts. 80 amp Draw. 12" diameter 9-1/8" Length. Variable speed functionality with the purchase of the iLIVING ILG8SFSC speed controller. 12 to 75 cfm psc and shaded Pole Blowers, Round Outlet.

Iliving 16 Inch Variable Speed Shutter Exhaust Fan, Wall-Mounted, 16" #ad - The shutter fan comes in 8 different sizes: 10 inch, 30 inch, 24 inch, 18 inch, 16 inch, 12 inch, 20 inch, and 36 inch; the 18 inch shutter fan has both a variable Speed ILG8SF24V and a single Speed model. Mounting holes 4. 25 inches center to center all four holes. Corrosion-resistant with OSHA compliant wire guards.

#ad